Discussion forum

SearchForum Home
  Open Discussions  Technical issues and support  Using capture o...
 Using capture on a the same machine as MagicQ
 
 10/23/2007 5:08:24 PM
Benana
1 posts


Using capture on a the same machine as MagicQ

Hi Guys,

 

I hope you can help, I am trying to get the demo version of capture to work with MagicQ PC on one local machine.  I have followed the brief instructions given by MagicQ, but I can't get it to talk to it.

It seems to work with the exe version of the AwardsCITP demo that comes with MagicQ, but not with the full Capture. 

My understanding is that MagicQ is transmitting the data to the localhost 127.0.0.1, but it does not seem possible to choose this IP address in capture.  There are no external universes available in the list.

Any help would be greatly appreciated as I'd like to get a chance to practice a little.

Lind regards
Ben

 10/24/2007 12:32:09 AM
Lars Wernlund
111 posts
5th


Re: Using capture on a the same machine as MagicQ
Hi Ben,

Have you tried with the very latest version of Capture, version 1.18? There were some important networking changes there that might help.

Also, you can try setting the "Compatible CITP Mode" in the options inside Capture!


Regards,
Lars Wernlund
 10/27/2007 12:08:07 PM
JustinP
28 posts
www.liteprogrammer.com


Re: Using capture on a the same machine as MagicQ

I'm using the latest version of MQ with the latest version of Capture, everything works fine. Have you already set the Artnet and the visualizer to Capture(same PC) on MQ?

 10/28/2007 8:53:10 AM
siewkit
7 posts


Re: Using capture on a the same machine as MagicQ

I think you need to set the IP address in MQ sofware.

Once you have the enter IP, goto view I/O and set to Artnet enable then reset visualiser.

Hope it helps !

 

  Open Discussions  Technical issues and support  Using capture o...
 
Contact Forum Register Login
Copyright 2007 by Capture Sweden