Lars,

thanks for the fix in v2.1.14 it's work now fine.

But capture don't save the printer and layout settings. 

The settings are: A3, 1mm marge, Adobe PDF printer.

 If I open A project, go to plot, open my plot, and give A  print  job. The plot is A4 straigt printed but not landscape and A3. Also the marges goes back to 25mm  instead of 1 mm.

If I will a new updated plot. I must first setup the printer settings again for I can print.

Regards,

Koen Vernooij
Blackwave
Holland